STRAWMASTER
7000 series of Heavy Harrows
STRAWMASTER
7000 series of Heavy Harrows
STRAWMASTER
7000 series of Heavy Harrows
The Degelman Strawmaster is engineered tough and designed to tackle enormous straw problems. Available in 5 row; 66 cm x 1.6 cm tines or 7 row; 66 cm x 1.3 cm tines equipped with tungsten carbide Endura-Tip tines, and set in large ten foot wide sections, this machine is at the forefront of modern straw management. The Strawmaster series of heavy harrows will shatter straw, control weeds, rake flax straw, and incorporate seed and chemicals.
The Degelman Strawmaster is engineered tough and designed to tackle enormous straw problems. Available in 5 row; 26” x 5/8” tines or 7 row; 26" x 1/2" tines equipped with tungsten carbide Endura-Tip tines, and set in large ten foot wide sections, this machine is at the forefront of modern straw management. The Strawmaster series of heavy harrows will shatter straw, control weeds, rake flax straw, and incorporate seed and chemicals.
The Degelman Strawmaster is engineered tough and designed to tackle enormous straw problems. Available in 5 row; 26” x 5/8” tines or 7 row; 26" x 1/2" tines equipped with tungsten carbide Endura-Tip tines, and set in large ten foot wide sections, this machine is at the forefront of modern straw management. The Strawmaster series of heavy harrows will shatter straw, control weeds, rake flax straw, and incorporate seed and chemicals.
MINIMAL PARTS, MINIMAL MAINTENANCE
MINIMAL PARTS, MINIMAL MAINTENANCE
MINIMAL PARTS, MINIMAL MAINTENANCE
The patented spring bar technology is at the heart of every Strawmaster. The simple torsional spring bar design is unlike other heavy harrows. Strawmaster uses a spring bar system that lets you apply downward pressure to the harrow sections as you need it. These twin spring bars allow in-cab hydraulic control by applying pressure from zero to 1900 pounds per harrow section. If you don’t need pressure, just put it in float.
Easy, Drop-Out Tine
Replacement
The tine bars easliy drop out by removing a few bolts making the replacement faster and easier.
Fast, Simple Adjustments
From the bottom up, Strawmaster was designed to hold and shatter straw, follow contour, rake flax residue, seed, control weeds, pack and spread residue evenly. To do this effectively, proper frame and tine angle adjustment is always important. When you’re harrowing a variety of crops under different field conditions, fast and easy adjustment is critical.
Ground Contouring
Under float or under pressure, the harrow sections are designed for flexibility. The spring bars are positioned along the sides of the harrow frame providing an even distribution of pressure to the frame. The spring bars can then flex In response to counter pressure from the land contours with each section rising over hills and falling into hollows.
The patented spring bar technology is at the heart of every Strawmaster. The simple torsional spring bar design is unlike other heavy harrows. Strawmaster uses a spring bar system that lets you apply downward pressure to the harrow sections as you need it. These twin spring bars allow in-cab hydraulic control by applying pressure from zero to 1900 pounds per harrow section. If you don’t need pressure, just put it in float.
Easy, Drop-Out Tine
Replacement
The tine bars easliy drop out by removing a few bolts making the replacement faster and easier.
Fast, Simple Adjustments
From the bottom up, Strawmaster was designed to hold and shatter straw, follow contour, rake flax residue, seed, control weeds, pack and spread residue evenly. To do this effectively, proper frame and tine angle adjustment is always important. When you’re harrowing a variety of crops under different field conditions, fast and easy adjustment is critical.
Ground Contouring
Under float or under pressure, the harrow sections are designed for flexibility. The spring bars are positioned along the sides of the harrow frame providing an even distribution of pressure to the frame. The spring bars can then flex In response to counter pressure from the land contours with each section rising over hills and falling into hollows.
The patented spring bar technology is at the heart of every Strawmaster. The simple torsional spring bar design is unlike other heavy harrows. Strawmaster uses a spring bar system that lets you apply downward pressure to the harrow sections as you need it. These twin spring bars allow in-cab hydraulic control by applying pressure from zero to 1900 pounds per harrow section. If you don’t need pressure, just put it in float.
Easy, Drop-Out Tine
Replacement
The tine bars easliy drop out by removing a few bolts making the replacement faster and easier.
Fast, Simple Adjustments
From the bottom up, Strawmaster was designed to hold and shatter straw, follow contour, rake flax residue, seed, control weeds, pack and spread residue evenly. To do this effectively, proper frame and tine angle adjustment is always important. When you’re harrowing a variety of crops under different field conditions, fast and easy adjustment is critical.
Ground Contouring
Under float or under pressure, the harrow sections are designed for flexibility. The spring bars are positioned along the sides of the harrow frame providing an even distribution of pressure to the frame. The spring bars can then flex In response to counter pressure from the land contours with each section rising over hills and falling into hollows.
Patented Torsion Technology
Simply rotate the 20.3 cm x 20.3 cm beam hydraulically and apply more pressure through the spring bars. Strawmaster works the way you want it to.
Breaking and Spreading Straw
The primary purpose of the Strawmaster is to breakup and spread most types of straw residue efficiently. High frequency vibration provides the shattering action for perfect residue control. For most farming practices, speeds of up to 19.3 kph can be attained.
Raking
The Strawmaster is quickly becoming the most popular machine for raking flax straw. It can maximize holding capacity by applying pressure through the spring bar control.
Patented Torsion Technology
Simply rotate the 8” x 8” beam hydraulically and apply more pressure through the spring bars. Strawmaster works the way you want it to.
Breaking and Spreading Straw
The primary purpose of the Strawmaster is to breakup and spread most types of straw residue efficiently. High frequency vibration provides the shattering action for perfect residue control. For most farming practices, speeds of up to 12 mph can be attained.
Raking
The Strawmaster is quickly becoming the most popular machine for raking flax straw. It can maximize holding capacity by applying pressure through the spring bar control.
Patented Torsion Technology
Simply rotate the 8” x 8” beam hydraulically and apply more pressure through the spring bars. Strawmaster works the way you want it to.
Breaking and Spreading Straw
The primary purpose of the Strawmaster is to breakup and spread most types of straw residue efficiently. High frequency vibration provides the shattering action for perfect residue control. For most farming practices, speeds of up to 12 mph can be attained.
Raking
The Strawmaster is quickly becoming the most popular machine for raking flax straw. It can maximize holding capacity by applying pressure through the spring bar control.
7 rows offers 68% More Ground Engagement
The Strawmaster 7 row gives you approximately 68% more ground coverage in the field. It’s combination of ground engagement and tine vibration can manage your crop residue without disturbing too much soil and losing moisture in the fall. In the spring you can break up lumps and clods and loosen the soil, which leaves a superior field finish and seedbed for the for seeding or planting.
Traditionally, more tines mean more wear parts. Every Strawmaster 7 comes equipped with standard carbide Endura-Tip tines. Which in addition to providing 4x the life of a standard harrow tine, actually which helps bust and move more straw.
The Degelman Strawmaster 7 High Performance Field Conditioner features 7 rows of 1.3 cm x 66 cm tines with 3.7 cm spacing built on frame heavy enough to handle the toughest conditions. This means more time in the field and less time in the shop.
7 ROW CONFIGURATION OFFERS A MID DUTY FINISH ON DEGELMAN’S LEGENDARY HEAVY DUTY FRAME
7 rows offers 68% More Ground Engagement
The Strawmaster 7 row gives you approximately 68% more ground coverage in the field. It’s combination of ground engagement and tine vibration can manage your crop residue without disturbing too much soil and losing moisture in the fall. In the spring you can break up lumps and clods and loosen the soil, which leaves a superior field finish and seedbed for the for seeding or planting.
Traditionally, more tines mean more wear parts. Every Strawmaster 7 comes equipped with standard carbide Endura-Tip tines. Which in addition to providing 4x the life of a standard harrow tine, actually which helps bust and move more straw.
The Degelman Strawmaster 7 High Performance Field Conditioner features 7 rows of ½” x 26” tines with 1-7/16” spacing built on frame heavy enough to handle the toughest conditions. This means more time in the field and less time in the shop.
7 ROW CONFIGURATION OFFERS A MID DUTY FINISH ON DEGELMAN’S LEGENDARY HEAVY DUTY FRAME
7 rows offers 68% More Ground Engagement
The Strawmaster 7 row gives you approximately 68% more ground coverage in the field. It’s combination of ground engagement and tine vibration can manage your crop residue without disturbing too much soil and losing moisture in the fall. In the spring you can break up lumps and clods and loosen the soil, which leaves a superior field finish and seedbed for the for seeding or planting.
Traditionally, more tines mean more wear parts. Every Strawmaster 7 comes equipped with standard carbide Endura-Tip tines. Which in addition to providing 4x the life of a standard harrow tine, actually which helps bust and move more straw.
The Degelman Strawmaster 7 High Performance Field Conditioner features 7 rows of ½” x 26” tines with 1-7/16” spacing built on frame heavy enough to handle the toughest conditions. This means more time in the field and less time in the shop.
7 ROW CONFIGURATION OFFERS A MID DUTY FINISH ON DEGELMAN’S LEGENDARY HEAVY DUTY FRAME
SPECIFICATIONS (Strawmaster 7000 Series 5 Bar)
|
Model |
SM30 |
SM50 |
SM70 |
SM82 |
|
Widths Available |
9.1 m (30’) |
15.24 m (50’) |
21.3 m (70’) |
25 m (82’) |
|
Weight |
3,492.7 kg |
5,152.8 kg |
6,323.1 kg |
6,911.8 kg |
|
Horsepower (min) |
100 |
150 |
200 |
300 |
|
Horsepower (ideal) |
150 |
200 |
300 |
350 |
|
Transport Length |
9.8 m |
12.8 m |
15.8 m |
17.7 m |
|
Harrow Sections |
3 |
5 |
7 |
9 |
|
Wing Beam |
N/A |
20.3 cm x 20.3 cm x 6.4 mm |
N/A |
20.3 cm x 20.3cm x 19.1 mm |
|
Tires - Transport & End Wheel |
11 L x 15 Highway |
11 L x 15 Highway |
12.5 L x 15 |
12.5 L x 15 |
ALL MODELS
|
Transport Hitch Weight |
-300 lbs (upwards) |
|
Transport Width |
14’ - 7” |
|
Transport Height |
11’ - 6” |
|
Trailer Frame |
4” x 8” x 1/4” |
|
Rows of Tines |
7 |
|
Tine Spacing |
14” Centers |
|
Tine Section Frame |
2” x 4” x 1/4” |
|
Tine Size |
1/2” x 26” Standard, Carbide Endura-Tip |
|
Tine Replacement |
Easy Drop-Out Tine Bar |
|
Hydraulics - Auto-Fold |
3-1/2” x 31” x 2” Rod |
|
Hydraulics - Center Beam Lift (optional) |
3” x 8” x 1-1/4” Rod |
|
Hydraulics - End Wheels (optional) |
2-3/4” x 8” x 1-1/4” Rod |
|
Hydraulics - Tine Angle (optional) |
Re-Phasing(incremental sizes) |
|
Tires - Main Cart |
16.5L x 16.1 |
SPECIFICATIONS (Strawmaster 7000 Series 5 Bar)
|
Model |
SM30 |
SM50 |
SM70 |
SM82 |
|
Widths Available |
30’ |
50’ |
70’ |
82’ |
|
Weight |
7,700 lbs |
11,360 lbs |
13,940 lbs |
15,238 lbs |
|
Horsepower (min) |
100 |
150 |
200 |
300 |
|
Horsepower (ideal) |
150 |
200 |
300 |
350 |
|
Transport Length |
32’ |
42’ |
52’ |
58’ |
|
Harrow Sections |
3 |
5 |
7 |
9 |
|
Wing Beam |
N/A |
8” X 8” X 1/4” |
N/A |
8” X 8” X 3/4” |
|
Tires - Transport & End Wheel |
11 L x 15 Highway |
11 L x 15 Highway |
12.5 L x 15 |
12.5 L x 15 |
ALL MODELS
|
Transport Hitch Weight |
-300 lbs (upwards) |
|
Transport Width |
14’ - 7” |
|
Transport Height |
11’ - 6” |
|
Trailer Frame |
4” x 8” x 1/4” |
|
Rows of Tines |
7 |
|
Tine Spacing |
14” Centers |
|
Tine Section Frame |
2” x 4” x 1/4” |
|
Tine Size |
1/2” x 26” Standard, Carbide Endura-Tip |
|
Tine Replacement |
Easy Drop-Out Tine Bar |
|
Hydraulics - Auto-Fold |
3-1/2” x 31” x 2” Rod |
|
Hydraulics - Center Beam Lift (optional) |
3” x 8” x 1-1/4” Rod |
|
Hydraulics - End Wheels (optional) |
2-3/4” x 8” x 1-1/4” Rod |
|
Hydraulics - Tine Angle (optional) |
Re-Phasing(incremental sizes) |
|
Tires - Main Cart |
16.5L x 16.1 |
SPECIFICATIONS (Strawmaster 7000 Series 5 Bar)
|
Model |
SM30 |
SM50 |
SM70 |
SM82 |
|
Widths Available |
30’ |
50’ |
70’ |
82’ |
|
Weight |
7,700 lbs |
11,360 lbs |
13,940 lbs |
15,238 lbs |
|
Horsepower (min) |
100 |
150 |
200 |
300 |
|
Horsepower (ideal) |
150 |
200 |
300 |
350 |
|
Transport Length |
32’ |
42’ |
52’ |
58’ |
|
Harrow Sections |
3 |
5 |
7 |
9 |
|
Wing Beam |
N/A |
8” X 8” X 1/4” |
N/A |
8” X 8” X 3/4” |
|
Tires - Transport & End Wheel |
11 L x 15 Highway |
11 L x 15 Highway |
12.5 L x 15 |
12.5 L x 15 |
ALL MODELS
|
Transport Hitch Weight |
-300 lbs (upwards) |
|
Transport Width |
14’ - 7” |
|
Transport Height |
11’ - 6” |
|
Trailer Frame |
4” x 8” x 1/4” |
|
Rows of Tines |
7 |
|
Tine Spacing |
14” Centers |
|
Tine Section Frame |
2” x 4” x 1/4” |
|
Tine Size |
1/2” x 26” Standard, Carbide Endura-Tip |
|
Tine Replacement |
Easy Drop-Out Tine Bar |
|
Hydraulics - Auto-Fold |
3-1/2” x 31” x 2” Rod |
|
Hydraulics - Center Beam Lift (optional) |
3” x 8” x 1-1/4” Rod |
|
Hydraulics - End Wheels (optional) |
2-3/4” x 8” x 1-1/4” Rod |
|
Hydraulics - Tine Angle (optional) |
Re-Phasing(incremental sizes) |
|
Tires - Main Cart |
16.5L x 16.1 |
ENGINEERED TOUGH.
ENGINEERED TOUGH.