Bulldozer Blades – Dozer Blades

Dozer Blade 3500 :

The 3500 series blade by Degelman is the best blade you can get for the 40-150 horsepower range. We can say with confidence that this the most rugged blade you’ll find in this category. Designed for 40-150 horsepower 2WD tractors, skid steers, front-end-loaders and most front-wheel-assisted tractors, the 3500 series gives you the robust blade design Degelman is known for in a compact blade.

Benefit from 0° to 18° two-way hydraulic angling that allows you to choose any angle you want; our tool-less D-lock® Quick-Tach mounting system so one person can attach/detach the blade in minutes; double-skin construction and AR400 reversible skid shoes.

Dozer Blade 4600/5700:

The Dozer Blade 4600/5700 is available in 9ft, 10ft, 12ft & 14ft widths. (Note: Larger blade widths may not be compatible will all tractors), it is also compatible with all 2WD, front-wheel- assist tractors and wheel loaders. The Dozer Blade 4600/5700 have 18° two-way hydraulic angling on 2WD, front-wheel-assisted tractors and 23” hydraulic lifting height.

Dozer Blade 5900:

If you’re running a modern two-wheel drive or a front-wheel-assisted tractor, we’ve got an industrial-strength blade made just for you. The 5900 comes out of the gate with 0° to 24° all-angle capabilities, 9° tilt and 28″ hydraulic lift. In addition, the 5900 has higher profile, D-lock® mid-mounting and industrial-strength AR400 skid shoes. Add to that, all the features that are Degelman standards-such as double-skin blade construction, Monarch manufactured cylinders and the toughest testing around-and you’ve got one robust blade.

Dozer Blade 66/69/7200:

When you choose a Degelman dozer blade, you’re choosing quality at every level. So, with the 6600, 6900 and the 7200 series, the following industrial-strength features are standard: they are all Available in 12ft, 14ft & 16ft widths, they have the most robust industrial-strength blades in the industry as well as being compatible with all 4WD tractors. With the D-lock® Quick-Tach tech it attaches in minutes with no welding and minimal bolt-on brackets.

Dozer Blade 7900:

The Degelman 7900 was developed specifically for producers moving silage, haylage and tackling the toughest snow removal jobs out there. Fully compatible with high horsepower four-wheel drive tractors, the 7900 has 40” lift and 6-way angling capabilities with full strength at all angles.

That means whether you’re at any angle you get the same industrial-sized strength that Degelman’s known for.

When you’re working with silage, under-frame clearance is important. That’s why at Degelman, our mounting system allows for extra under frame clearance. So you can pack and push more silage faster without getting hung up. We also make sure our mounting hardware gives you a smooth, clean underbelly to minimize dragging silage back. Add a two foot perforated silage extension, and you’ll move more silage than ever. 

Perfect Balance of Engineered Toughness and Intelligent Design

Since 1962, Degelman Industries has pioneered the perfect balance of engineered toughness and intelligent design. The result is outstanding equipment that exceeds expectations and outperforms. We achieve this through meticulous design and vigilant customer service.

Every day, the designers in our state-of-the-art research and development facility work tirelessly to provide mounting solutions to fit the ever-growing population of tractor models and manufacturers more than 450 models and counting. If it has our name on it, we expect nothing short of optimal performance.

Bulldozer Blade Attachments

Top Extension

Top extension attachments are designed to maximize pushing capacity by preventing spillover.

Silage Extension

Our Degelman Silage Extensions are made from heavy-grade steel and are two feet high so you have maximum volume control. They’re also see-through for increased safety and efficiency.

High Volume Side Plate

Whatever degree your blade is angled at, adding a High Volume Side Plate means you can dramatically improve the amount of volume you can push. It also decreases the amount of snow trailing off your blade so you move more snow with fewer passes.

One-Foot Extension

If you want a bigger blade, or if you add dual wheels to your tractor and want extensions as wide as your wheelbase, our One-Foot Extensions are the answer. Easy to add and as strong as the blade they’re attached to.

Bite Extension

Similar to our One-Foot Extension, our Bite Extension allows you to doze along curbs, foundations or silage container bunks and scrape material off without leaving a trail.

Max Temp® Steel

MaxTemp steel is the same steel that’s used in industrial bulldozer blades. It’s made from hardened high carbon steel that’s strong and durable without being brittle. Made for dozing dirt, levelling roadways, gravel or snow.

Serrated Max Temp® Steel

Serrated MaxTemp Steel cutting edges use the same hardened steel as above but include an added serrated edge that’s ideal for dozing ice.

Top Extension

Rubber Cutting Edge

Designed to be used either for slurry barns or for snow removal. The Rubber Cutting Edge essentially squeegees barn floors easily for maximum material pick-up. And for snow removal usage, the rubber edge means you can doze without fear of tripping on manhole covers.

Rock Digger Attachment

Used for digging boulder sized rocks and stumps this attachment can replace the blade on 4600, 5700 and 6600 models.

Urethane Cutting Edge

A harder material made for close scraping and removal of compact snow and ice. The Urethane Cutting Edge is a durable polymer that gives you three times the wear resistance of rubber while protecting you from tripping on manhole covers. Available for Strongbox only.



Dozer Blade Break Down


Dozer Series 3500 4600/5700 5900 66/69/7200 7900
Tractor Horsepower Range 40 – 150 HP 65 – 380 HP 125 – 500 HP 200 – 500 HP 300 – 700 HP
Tractor Type 2WD & FWA 2WD & FWA 2WD & FWA 4WD 4WD
Blade Widths Avail. 8′, 9′, 10′, 12′ 9′, 10′, 12′, 14′ 10′, 12′, 14′ 12′, 14′, 16′ 12′, 14′, 16′, 18′, 20′
Blade Weight 1350 – 1450 lbs 2050 – 2950 lbs 3390 – 3660 lbs 3365 – 5055 lbs 5165 – 7650 lbs
Blade Height (standard) 27″ 33″ 36″ 38″ 47″
Blade Height (with top extension) 34″ 40″ 43″ 45″
Blade Height (with silage extension) 47″ 57″ 60″ 62″ 71″
Lifting Height (approx) 20″ 23″ 23″ 25″ 40 – 60″
Lift Cylinders 3 x 8″ 3½ x 8″ 3½ x 8″ 3 – 4½” dia 3½ – 4½” dia
Hydraulic Angle 18° / 30° 18° / 30° 24° 18° (6600 – manual angle) 24° – 30°
Angle Cylinders 2½ x 16″ 3 x 16″ 3 x 20″ 4 – 4½” dia 4 – 4½” dia
Hydraulic Vertical Tilt n/a n/a 15° 13° (7200 model only) 10°
Tilt Cylinders n/a n/a 3 x 8″ 4 x 8″ (7200) 4″ dia
Cutting Edge (MaxTemp® Steel) ⅝ x 6″ ⅝ x 6″ ⅝ x 6″ ⅝ x 6″ ¾ x 8″
Digging Depth 6 – 8″ 6 – 10″ 10 – 14″ 8 – 12″ 14 – 24″
Skid Shoes (abrasion resistant) Standard Adjustment Standard Adjustment Standard Adjustment Standard Adjustment Variable Adjustment
Mounting System D-lock® Quick-Tach D-lock® Quick-Tach / (HQT 5700 only) D-lock® Quick-Tach / HQT D-lock® Quick-Tach / HQT D-lock® Quick-Tach / HQT
Mounting Location Rear Axle Rear Axle / Mid-Mount Mid-Mount Front-4WD Mount Front-4WD Mount
Mouldboard (ripple formed blade) 10 ga 316 316 316 ¼”
3500 Series 4600/5700 Series 5900 Series 6600/6900/7200 Series 7900 Series

Hydraulic Quick-Tach

In the spirit of safety and simplicity, Degelman has pushed the design process one more time by coming up with the all new HQT-Hydraulic Quick Tach System. This precision built feature utilizes a hydraulic pin engagement concept which allows the operator to secure the blade to the Dozer mounting framework from the tractor seat. It avoids the dangers, awkwardness and hassles of crawling around the tractor to secure the dozer engagement. Just one more example of how Degelman pushes design to make things a little safer, more convenient and last longer.

Watch the video

Dozer Blades
Dozer Blades
Dozer Blades


Induction-Hardened Shafting

We start with oversized induction-hardened chrome shafting for strength. It’s a premium shaft that has the hardest surface possible to resist nicks, without being brittle. This allows the shaft to be tough, but flexible enough to bend without breaking. As a result, our cylinders last longer and can handle tougher loads for angling, tilting and lifting.

Corrosion Resistant Chrome

Rusted chrome gets pitted and can tear the seals. To increase the lifespan of our cylinders, the highest rated and rust resistant chrome available in the industry is what is chosen for our shafting.

Cylinder Break Apart
Dozer Blades

Precision Machined Tubing Finish

Our tubing is precision skive and burnished to provide a smooth ovality free running surface for the cylinder’s seals. This process maximizes the life of the seal and ensures smooth operation for years to come.

Superior Seals

Our premium seal package and wear band system means zero metal-to-metal contact for increased longevity. The seal kit containing features like a double lipped scrapper and piston seals with built in pressure reliefs is specifically tailored to our applications. With a focus on reduced friction and increased seal longevity, you can be assured of superior seal performance throughout the life of your machine.

Precision Machined High Grade Wear Bands

Our wear bands are built into our cylinder system and made out of a special high-grade wear material that eliminates scoring on the shaft and cylinder wall during high side loads. Without high-grade wear bands, the cylinders can get scratched and become ineffective. The addition of wear bands to our cylinders means increased durability and better performance under maximum side loads.

Solid Steel Ends

Uniform cast steel ends or precision cut and machined steel lugs are used on every Degelman cylinder providing durability and performance second to none.